Cue And Rev Check - Sony DSR-20MD Service Manual

6-3-9. CUE AND REV CHECK

Waveform in CUE or REV.
OK: The distance between peaks should be equal.
NG: The distance between peaks is not equal.
CH1
EXT
TRIG
Oscilloscope
Trigger slope: +
3 Check the waveform in the M mode.
4 Check the waveform in the m mode.
If 3 or 4 is "NG", perform "6-3-7. TRACKING
ADJUSTMENT" again.
1 Connection.
Refer to 2 Connection of
6-3-6. Adjustment
preparations.
RP board
POWER
5-52
CUE
(see the left figure)
REV
(see the left figure)
2 Playback.
Tracking tape
(XH2-1 AST)
Note: Tape Path (Refer
to page 5-4) (J-5)
DECK
XH2-1