PHASE ADJUSTMENT K
Rack joint gear
3
Note: 2 should be aligned with the hole of the chassis.
: 3 should be aligned with the hole of the rack (SC)/(LC).
PHASE ADJUSTMENT M
The shaft is inserted
into the hole.
2
MIC holder (Front side)
1
MIC lever (Front side)
Rack holder
RS gear assembly
PHASE ADJUSTMENT L
Rack joint gear
MIC lever
The holes of the MIC lever and the
RS gear assembly are aligned.
The holes of the plate link assembly and the
RS arm assembly are aligned.
RS arm assembly
Reel motor
Plate link assembly
5-9
RS gear
assembly