Sony DSR-20MD Service Manual page 123

7. Set the LOADING position. (Refer to page 5-3)
8. TG3/4 arm block assembly.
• Removing: 1 → 2 → 3
Cannot be removed.
Can be removed
or attached.
TG3/4 arm block assembly
3 PH-C TG3/4 arm block assembly
9. TG3/4 base block assembly.
2
1
TG3/4 base block
assembly
0. TG3/4 arm assembly, TG3/4 limiter spring, TG3/4 gear, TG3/
6 roller assembly, TG3 lock spring and TG3/4 base assembly.
TG3/4 arm assembly
TG3/4 limiter spring
Long
TG3/4 gear
2. Attaching
1. Set the LOADING position. (Refer to page 5-3)
2. TG3/4 arm assembly, TG3/4 limiter spring, TG3/4 gear, TG3/
6 roller assembly, TG3 lock spring and TG3/4 base assembly.
3. TG3/4 base block assembly.
4. TG3/4 arm block assembly.
1
TG5/6 arm block assembly
In this state, rotate the main cam
to the UNLOADING position.
5. Attach the parts in the order of 6 → 5 → 4 → 3 → 2.
6. Adjust them according to the flowchart (START-3) on page
5-43.
5-31
PH-C : Page 5-7
TG3/6 roller assembly
TG3 lock spring
Short
TG3/4 base assembly
1
2 2
3
TG3/4 arm block assembly