Electrolux EKOF32MDIS Instruction Manual page 26

49 electrolux assembly instruction
Step 16
Install the ignition wire to the left side
valve by plugging the end of the wire
into the socket.
Step 17
Install the side knob (O) into the side
valve.
Step 18
Install the door handle (P) into the
door (Q) using two screws (CC).
Hardware used
Screw
CC
M6 x 8
O
CC
Q
P
x 2
Step 19
1. Insert the pin on the bottom of the
door assembly into the hole on the
right bottom side of the cabinet
assembly.
2. Install the door bracket (R) on the
right side cabinet panel using two
screws (FF) and insert the pin on the
top of the door assembly into the hole
on the door bracket (R).
Hardware used
Screw
II
x 2
M4 x 10
Step 20
1. Install the handle (P) to the drawer
(S) using two screws (CC).
2. Slide the drawer (S) on the drawer
support.
Hardware used
Screw
x 2
CC
M6 x 8
assembly instruction electrolux 50
Q
II
R
P
CC
S