Page 1
Customer Service (888) 340-0482 Keys Fitness Products 4009 Distribution Drive Suite 250 Garland, TX 75041 www.keysfitness.com Model Name : HT402t Serial Number : Purchase Date : Write down for future reference Serial Number Decal Location 415-00014 09/05 Rev. B HT402T...
Table of Contents Important Safety Information Before You Start Assembly Warm Up Exercises Moving Instructions Power Requirements Console Panel Functions Program and Operation Belt Adjustment Maintenance Instructions Troubleshooting Guide Error Messages Parts List Exploded View Warranty Information 11-12...
SAFETY PRECAUTIONS AND TIPS 1. It is the owner’s responsibility to ensure that all users of this treadmill have read the Owner’s Manual and are familiar with warnings and safety precautions.
Do not stand on the walking belt while pressing the Power button or Start/Stop button. Always adjust the speed of the treadmill in small increments as this treadmill is capable of high speeds. If you are taking medication, consult your physician to see if the medication will affect your exercise heart rate.
Assembly The HEALTH TRAINER 402t treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill. Do not throw away any packing materials until the unit is working properly. Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.
Page 6
Do not plug in the power cord until all assembly step are completed. 1. With the treadmill deck in the down position, leave the unit on the original packing material to assemble all parts.Refer to Figure 1.
Page 7
Using four screws previously removed from console, attach console to the Top Rail. Refer to Figure 5. CONGRATULATIONS!!!!!!!! You have completed assembly of your HealthTrainer 402t Treadmill. Figure 4: Top Rail Assembly CONSOLE Figure 5: Console Wire Connections...
Warm Up Exercises EXERCISE GUIDELINES WARNING! Before beginning this or any exercise program, you should consult your physician. This is espe- cially important for individuals over the age of 35 or individuals with pre-existing health problems. Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the mus- cles and raising body temperature.
Using extreme caution, move the treadmill to the desired location. To set the treadmill down, place one foot on the center of the base crossbar and carefully lower treadmill onto base in resting position.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges, and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Console Overview CONSOLE FUNCTIONS: There is one display windows on the control panel to provide feedback information. This window will display information on the following functions: TIME Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds). SPEED Indicates MPH (miles per hour) in .1 increments.
Page 12
Console Overview CONSOLE BUTTONS: There are 8 Console button. POWER: Used to turn unit off and on. START: Used to Start unit. STOP: Used to Stop unit. RESET: Used to Reset values in display window. PROGRAM: Used to toggle thru five preset programs. MODE: Used to toggle thru different modes.
Program and Operation MODE OVERVIEW: This treadmill had 5 different exercise modes. Following as a brief overview and instruction for each mode. MANUAL MODE: Allows user to manually adjust Speed with + or - buttons. Time, Calories and Distance count up from 0.
“Walking Belt Slipping” instructions. WALKING BELT IS SHIFTING TO THE RIGHT (Diagram 2) First, turn the treadmill on to run at 1 mph. Using the hex key pro- vided, turn the right rear roller adjustment bolt ¼ turn in the clock- wise direction.
CLEANING Routine cleaning of your HT402t Fitness treadmill will extend the life of your treadmill. WARNING! To pre- vent electrical shock, be sure the power to the treadmill is OFF and the unit unplugged from the wall electrical outlet before attempting any cleaning or maintenance.
(Refer to “Power Requirements” on page 11). 3. Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in.
Error Messages Treadmill Error Messages. Your treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error codes will be displayed in the console display windows. Error Messages Er01 - The console and controller are disconnected. Check cable connections.
ALLEN BOLT M8*15 402-00127 ALLEN BOLT, M8X30 402-00128 ALLEN BOLT, M8*55 402-00114 SHOULDER ALLEN BOLT M8*60 402-00018 PHILIP SCREW M6*12 HT402T Parts List Rev A REF # PART # DESCRIPTION 402-00130 CHAMBER BOLT, M6X30 402-00015 PHILIP SCREW ST4.2*16 402-00031 PHILIP SCREW ST4.2*13 402-00019 PHILIP SCREW ST4.2*13...
Keys reserves the right to change manufacturers of any part to cover any existing warranty. To obtain warranty service, you must contact a Keys authorized service technician or Keys Fitness at our phone numbers located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any ship- ping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
Page 21
Customer Service (888) 340-0482 Keys Fitness Products 4009 Distribution Drive Suite 250 Garland, TX 75041 www.keysfitness.com...