Standing Pilot Wiring - White Mountain Hearth DV25IN33LN-1 Owner's Manual

For Standing pilot Ignition Wiring
Appliance Requirements
WARNING: DO NOT CONNECT 110-120 vAC TO THE
GAS CONTROL vALvE OR THE AppLIANCE WILL
MALFUNCTION AND THE vALvE WILL BE DE-
STROYED.
Page 20

STANDING pILOT WIRING

STANDING PILOT WIRING DIAGRAM
Optional Wall Switch
Position the wall switch in the desired position on a wall. Run a
maximum of 25 feet (7.8m) or less length of 18 A.W.G. minimum
wire and connect it to the fireplace valve pigtails.
WARNING: DO NOT CONNECT THE 110-120 vAC
TO THE WALL SWITCH OR THE CONTROL vALvE
WILL BE DESTROYED.
CAUTION: LABEL ALL WIRES PRIOR TO DISCONNEC-
TION WHEN SERVICING CONTROL. WIRING ERRORS
CAN CAUSE IMPROPER AND DANGEROUS OPERATION.
VERIFY PROPER OPERATION AFTER SERVICING.
25554-1-0409