3
Getting to Know the Adapter
3.1 The Ethernet Interface
Ethernet: The Ethernet port connects to an Ethernet network cable. The other end
of the cable connects to your computer or other Ethernet-enabled network device.
3.2 The Adapter's Buttons
The following figure shows the adapter's buttons.
Security/Reset: Set the status of the device members or restore the factory
default settings.
�
Pressing and holding the Security/Reset button for less than 3 seconds
makes the adapter a member of the existing AVLN. Pressing and holding the
Button for between 10 seconds and 15 seconds makes the adapter restore
the factory default settings. For more details, see chapter 6 .
7HP120 User Manual
Figure 2 Side Panel of the Device
4