Joining A Network; Using The Security/Reset Pushbutton - 7inova 7HP120 User Manual

7

Joining a Network

This chapter describes how to add a device to an existing HomePlug AV logical
network (AVLN) using the Security/Reset pushbutton and using the Utility.
Operation progress and outcome can be monitored by observing the behavior of
the power LED.

7.1 Using the Security/Reset Pushbutton

Scenario:
Devices A and B are located in network N. Device C (the joiner) that is not located
in any networks attempts to join Network N. Any devices on Network N can
become the 'adder'.
Do as follows to add Device C to Network N using the Security/Reset button:
Step 1 Press the Security/Reset button on Device A (or Device B) for less than
3 seconds, making it the 'adder'.
Step 2 Within 2 minutes, press the Security/Reset button Device C (the 'joiner')
for less than 3 seconds.
Step 3 Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1 second
intervals until the process succeeds or fails. It will illuminate steadily on success. If
7HP120 User Manual
Figure 20 Joining a network
28