Using The Utility - 7inova 7HP120 User Manual

an error occurs, the Power indicator on Device A (or Device B) and Device C will
flash unevenly for 2 minutes.

7.2 Using the Utility

Scenario:
Devices A and B are located in Network N. Device C (the joiner) that is located in
another network attempts to join Network N. See
Do as follows to add Device C to Network N using the Utility:
Step 1 Connect Device C to the network card of a PC.
Step 2 Open the Utility. The Main tab page displays information about Device C
after connection succeeds. See
Step 3 Click the Privacy tab page. Enter a name in the Private Network Name
field. See
Step 4 Click Set Local Device Only. When the page as shown in
displayed, the setting succeeds. Now Device C has been removed from
its logical network.
Step 5 Press the pushbutton on Device A or B for less than 3 seconds, making
it the 'adder'.
Step 6 Within 2 minutes, press the pushbutton on Device C (the 'joiner') for less
than 3 seconds.
Step 7 Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1 second
intervals until the process succeeds or fails. It will illuminate steadily on success. If
an error occurs, the Power indicator on Device A (or Device B) and Device C will
flash unevenly for 2 minutes.
7HP120 User Manual
.
Figure 18
29
.
Figure 17
Figure 19 is