Using The Utility - 7inova 7HP120 User Manual

6.2 Using the Utility

Scenario:
Devices A and B are located in different networks. Users want to use them to form
a logical network.
In this case, using the Security/Reset pushbutton cannot pair Devices A and B.
Users can only use the Utility to form a logical network.
Do as follows to form a logical network using the Utility:
Step 1 Connect Device A to the network card of a PC.
Step 2 Open the Utility. The Main tab page displays information about Device A
after connection succeeds.
Step 3 Click the Privacy tab page. Enter a name in the Private Network Name
field.
7HP120 User Manual
Figure 17 Local device on your computer
Figure 18 Set the network name for your PLC
26