Faults, What To Do - Siemens WM14Y591GB Instruction Manual And Installation Instructions

Faults, what to do?

Faults
Water is running out.
Water not flowing in.
Detergent not
washed in.
Washing-machine
door cannot be
opened.
Programme does
not start.
Detergent solution is
not drained.
Water not visible in
the drum.
Spin result not
satisfactory.
Washing wet/too
damp.
Spin cycle actuated
several times.
Residual water in the
dispenser for care
product.
Odour formation in
the washing
machine.
Loud noise
formation, vibrations
and "wandering"
during spin cycle.
Cause/Remedy
– Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
– Start/Reload
Ü
– Tap not open?
– Filter blocked? Clean the filter. ~ Page 34
– Supply hose kinked or jammed?
– Safety function active. Stop programme? ~ Page 19
– Rinse Hold (without final spin) selected? ~ Page 20
$
– Can be opened via emergency release only? – Can be opened via emergency release only? – Can be opened via emergency release only? ~ Page 35
– Start/Reload
Ü
– Door closed?
– Childlock active? Deactivate. ~ Page 18
– Rinse Hold (without final spin) selected? (without final spin) selected? (without final spin) selected? ~ Page 20
$
– Clean the drain pump. ~ Page 32
– Clean outlet pipe and/or drainage hose. – Clean outlet pipe and/or drainage hose. – Clean outlet pipe and/or drainage hose.
Not a fault – water below the visible area. Not a fault – water below the visible area. Not a fault – water below the visible area.
– Not a fault – unbalanced load detection system has stopped the – Not a fault – unbalanced load detection system has stopped the – Not a fault – unbalanced load detection system has stopped the
spin cycle, washing unevenly distributed. spin cycle, washing unevenly distributed. spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum. Distribute small and large items of washing in the drum. Distribute small and large items of washing in the drum.
– Less Ironing
Less Ironing Less Ironing
{
– Too low speed selected? – Too low speed selected? – Too low speed selected? ~ Page 22
Not a fault – unbalanced load detection system adjusts imbalance. Not a fault – unbalanced load detection system adjusts imbalance. Not a fault – unbalanced load detection system adjusts imbalance.
– Not a fault – effect of the care product not impaired. – Not a fault – effect of the care product not impaired. – Not a fault – effect of the care product not impaired.
– If required, clean insert. ~ Page 32
Run Cotton 90 °C programme without washing.
Use standard detergent.
– Appliance aligned?
Align the appliance. ~ Page 50
– Appliance feet fixed?
Secure appliance feet. ~ Page 50
– Transportation safety devices removed?
Remove transportation protection devices. ~ Page 45
not selected?
or Finish in time selected? time selected? time selected?
Page 18 Page 18
~ ~
Page 32 Page 32
~ ~
selected? ~ Page 17
37