Machine Information; Checking The Serial Number; Checking The Firmware Version; Reset Operations Overview - Brother DCP-J4120DW Basic User's Manual

Machine Information

Checking the serial number

You can see the machine's serial number on
the Touchscreen.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Machine Info.
d
Press Machine Info.
e
Press Serial No.
Your machine's serial number will
appear on the Touchscreen.
f
Press .
Checking the firmware
version
You can see the machine's firmware version
on the Touchscreen.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Machine Info.
d
Press Machine Info.
e
Press Firmware Version.
f
Press Main Version.
Your machine's firmware version will
appear on the Touchscreen.
g
Press .

Reset operations overview

B
The following reset operations are available:
1 Machine Reset
B
You can reset all the machine's settings
that you have changed, such as the date
and time.
2 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
3 All Settings
You can restore all settings to the factory
default.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.

How to reset the machine

a
Press
B
b
Press All Settings.
c
Press a or b to display
Initial Setup.
d
Press Initial Setup.
e
Press Reset.
f
Press the option you want to reset.
g
Press Yes to confirm.
h
Press Yes for two seconds to reboot the
machine.
Troubleshooting
(Settings).
B
B
B
45