Brother DCP-J4120DW Basic User's Manual page 37

Error Message
Image Too Long
Image Too Small
Ink Absorber Pad Full The ink absorber box or flushing box
Ink Absorber Pad
NearFull
Cause
The proportions of your photo are
irregular so effects could not be
added.
The size of your photo is too small to
trim.
is full. These components are
periodic maintenance items that may
require replacement after a period of
time to ensure optimum performance
from your Brother machine. Because
these components are periodic
maintenance items, the replacement
is not covered under the warranty.
The need to replace these items and
the time period before replacement is
dependent on the number of purges
and flushes required to clean the ink
system. These boxes acquire
amounts of ink during the different
purging and flushing operations. The
number of times a machine purges
and flushes for cleaning varies
depending on different situations. For
example, frequently powering the
machine on and off will cause
numerous cleaning cycles since the
machine automatically cleans itself
upon power up. The use of
non-Brother ink may cause frequent
cleanings because non-Brother ink
could cause poor print quality, which
is resolved by cleaning. The more
cleaning the machine requires, the
faster these boxes will fill up.
NOTE
Repairs resulting from the use of
non-Brother supplies may not be
covered under the stated product
warranty.
The ink absorber box or flushing box
is nearly full.
Troubleshooting
Action
Choose a regularly proportioned
image.
Choose a larger image.
The ink absorber box or flushing box
must be replaced. Contact Brother
customer service or your local
Brother Authorised Service Centre to
have your machine serviced.
Other reasons for cleaning are:
1 After a paper jam has been
cleared, the machine
automatically cleans itself.
2 The machine automatically cleans
itself after sitting idle for more than
30 days (infrequent use).
3 The machine automatically cleans
itself after ink cartridges of the
same colour have been replaced
12 times.
The ink absorber box or flushing box
must be replaced soon.
Contact Brother customer service or
your local Brother dealer.
B
29