Brookstone Renew User Manual page 16

Preparation before use
Sitting on the Brookstone Renew
Massage Chair
• The rollers are usually stored in the
upper part of the backrest. This
position is known as the "storage
position".
• If the rollers are not in the storage
position, simply reset by pressing
the power button on the controller
before sitting on the massage
chair.
• Do not sit down on the chair with
the leg rest raised. Any sudden
heavy weight on the leg rest could
cause damage to the mechanism,
or it may result in accident or injury
if the chair tips over.
• Ensure that the backrest returns to
the upright position before sitting
on the chair, then recline it to your
preference.
One touch to Zero Gravity
• Simply press the
button once, to recline to Zero
Gravity position.
How to recline the backrest
• To raise the backrest, push and
hold the (Incline button) until the
backrest is at your desired angle.
• To recline the backrest, push and
hold the (Recline button) until the
backrest is at your desired angle.
TM
Caution
Zero Gravity
Raising and lowering the foot rest
The foot rest can be raised independently
for additional benefit.
• To raise the foot rest, press and hold
the foot rest button
rest is at the desired angle.
• To lower the foot rest, press and hold
the foot rest button
rest is at the desired angle.
Foot rest extension and retraction
• Raise the foot until your feet are
placed at a natural position.
• Stretch your feet to a comfortable
position. The foot rest will retract
or extend and stop at an
appropriate position.
To use the heat function
• Press heat button to turn on / off
the lumbar heat function.
until the foot
until the foot
14