Download Print this page

Viking Range VDSC530 Installation Manual

Range/rangetop rear trim accessories & range curb base fronts

Advertisement

Quick Links

Installation Guide

Range/Rangetop Rear Trim Accessories
& Range Curb Base Fronts

Advertisement

loading

Summary of Contents for Viking Range VDSC530

  • Page 1: Installation Guide

    Installation Guide Range/Rangetop Rear Trim Accessories & Range Curb Base Fronts...
  • Page 2 Rear Trim Accessories All rear trim devices are installed in the same basic way. ATTACHING REAR TRIM (Illustration I) Grasp the trim on each end and carefully place in the channels (B) located at each rear corner of the product. Align the screw holes (A) at each end of the trim device with the holes (A) in each rear channel of the product.
  • Page 3 (See Figure 2) These spacers can also be removed if used with any Figure 2 of the models listed below: • 30”, 36” and 48” VGCC/CVGCC • VDSC530/CVDSC530 • VDSC536/CVDSC36 • VGRT530/CVGRT530 • VGRT536/CVGRT536 *If you have one of these models, the spacers are not required, even if with a combustible wall.
  • Page 4 In no case will Viking Range, LLC accept responsibility for any claims which may result from heat damage against a rear wall, including cosmetic damage. It is the total responsibility of the owner/end user to ensure that the material...
  • Page 5 Curb Bases STANDARD CURB BASE FRONT 1. The standard curb base front (A) is completely assembled. 2. Remove the assembly from the carton and simply clip onto the front range legs. 3. The assembly is adjustable about 2” (5.1 cm) front to back so that alignment with the cabinet toe front is possible.
  • Page 6 Curb Bases CUSTOM CURB BASE FRONT 1. Remove the standard curb base front assembly from the carton. 2. Remove the front (A) from the mounting assembly (B). 3. Attach locally supplied front (C) to the mounting assembly (B) and simply clip onto the front range legs.
  • Page 7 Curb Bases COUNTERTOP REAR TRIM 1. Locate screw hole openings (A) on back of island trim near the top. 2. Align screw hole openings on countertop rear trim with the ones on the back of the island trim. 3. Attach rear trim to island trim with enclosed screws.
  • Page 8 Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information call 1-888-845-4641 F1448N EN (100113)

This manual is also suitable for:

Cvdsc530Vdsc536Cvdsc36Vgrt530Cvgrt530Vgrt536 ... Show all