Zodiac Pool Systems Nature2 Express Installation And Operating Manual page 3

2. Locate the return line. You will need an area of approximately 6" to install your
2
Nature Express.
®
Turn OFF the pool pump. Your pump/filter system is operated under pressure.
3.
The pressure must be released before you begin work. Please see your pump/
filter owner's manual for further instructions.
4. Close any valves. If your pool filtration equipment is below the
water level of the pool, you will either need to close the return valve or use
winterizing plugs at the skimmer and return fittings to prevent excessive water loss.
Contact your Nature
information.
For Aboveground Pools
Aboveground pools are often plumbed with flexible or corrugated pipe. These systems
require use of the rigid PVC adapter included with Nature
pools. The adapter fits most filtration systems.
• Disconnect the return hose and fitting from the filter.
• Wrap tape around threads of Nature
• Thread adapter into the outlet port in the filter.
5. Choose the clamp assembly, (1-1/2" or 2") that fits your return line (Nature
for aboveground pools comes with the 1-1/2" clamp assembly only).
6. Apply a small bead of silicone lubricant around the saddle clamp gasket.
2
dealer or Zodiac Customer Service at 800-822-7933 for more
2
3
2
Express for aboveground
PVC adapter.
2
Express