Table of Contents
Advertisement
Quick Links
Notice X7 ANG.qxd
9/12/08
10:31
Page 3
1 4
Contents
Congratulations!
You have just acquired the Zodiac X7 Quattro.
Thank you for purchasing our product.
Please read this user manual carefully and follow
he instructions for assembly.
15
15
15
16
17
19
20
21
22
24
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zodiac Pool Systems X7 Quattro
Summary of Contents for Zodiac Pool Systems X7 Quattro
-
Page 1: Table Of Contents
Notice X7 ANG.qxd 9/12/08 10:31 Page 3 Contents Congratulations! You have just acquired the Zodiac X7 Quattro. Thank you for purchasing our product. Please read this user manual carefully and follow he instructions for assembly. PARTS LIST ADVICE ASSEMBLY FITTING THE HOSE... -
Page 2: Parts List
ADVICE 6 5 4 3 2 1 0 0 During the season we recommend you leave your X7 Quattro in the pool and remove it when you do shock treatments. If you wish to remove it while bathing, remove the hose, Female end but do not roll it up. -
Page 3: Fitting The Hose
Notice X7 ANG.qxd 9/12/08 10:31 Page 5 Fitting the hose The hose for your X7 Quattro is composed of 12 x 1 m sections, plus a smaller section of 17.5 cm. • The ideal hose length for your pool corresponds Figure 1... -
Page 4: Connection
IMPORTANT NOTE: You can connect the X7 Quattro hose to the suction point or to one of the skimmers in your pool. It is preferable to use a suction point situated at mid-distance of the main length of your pool. - Page 5 Notice X7 ANG.qxd 9/12/08 10:31 Page 7 Connection Connect the male part of the hose adaptor to the leaf trap. Check that there is no air in the hose assembly, then connect it to the vacuum point by joining the last hose section to the female part of the hose adaptor (Figure Connection to the vacuum point...
-
Page 6: Flow Test
NB: all these operations must be carried out under water so that the pump does not take in air. 6 5 4 3 2 1 0 0 • Remove the X7 Quattro from the hose and replace with the pool pulse (Figure 11). -
Page 7: Cleaning The Leaf Trap
Notice X7 ANG.qxd 9/12/08 10:31 Page 9 Cleaning the leaf trap How to remove the transparent container: Figure 16 • Stop the pump before opening the Zodiac leaf trap. • Without taking off the hose sections, hold the Zodiac leaf trap lid in one hand. -
Page 8: Problem Solving
If the water flow is correct: • Check that the cleaner suction inlet is not clogged up with debris. • Is the X7 Quattro Diaphragm damaged? (see pages 10 and 11) • In order to ensure complete cleaning of the pool, the total time The X7 Quattro doesn't may be split into periods. -
Page 9: Changing The Diaphragm
Figure 19 • step: removing the Diaphragm • Place the X7 Quattro on a flat surface. Remove the small Flexi Hose section by pressing the latches on either side of the hose (see figure 12 page • Push the 2 clips maintaining the handle of the robot upwards (Figure 19). -
Page 10: Figure
Notice X7 ANG.qxd 9/12/08 10:31 Page 12 Changing the Diaphragm Figure 25 • Then simply remove the Diaphragm from the holder by pulling Diaphragm it upward (Figure 25). • step: fitting the new Diaphragm • Place the new Diaphragm Figure 26 Figure 27 on the handle and replace the handle in the casing by aligning... -
Page 11: Guarantee
Period of guarantee: The period of the guarantee is fixed at 3 YEARS for the X7 Quattro, from the date of invoicing the first user. The X7 Quattro cleaner benefits from an unconditional guarantee... - Page 12 10:31 Page 14 Warning WARNING: USE OF THE X7 QUATTRO IN A VINYL LINER POOL Certain vinyl liner patterns are particularly susceptible to rapid surface wear or pattern removal caused by objects coming into contact with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic pool cleaners.
Need help?
Do you have a question about the X7 Quattro and is the answer not in the manual?
Questions and answers