Table of Contents
Advertisement
Timer
The Timer (Menu 2.4.8) allows you to count down from a preset time to
zero. A series of tones plays when the time reaches zero.
To start the timer:
1. From the Idle screen, press [
Timer.
2. Press <Set>.
3. Using the numeric keys, enter the number of hours, minutes and
seconds that you wish to count down then press <OK>.
4. Press [
] to start the timer.
To pause the countdown, press [
When the count reaches 0, an alarm sounds and Time Out displays on the
screen. Press <OK> to cancel the alarm and message.
Stopwatch
The Stopwatch (Menu 2.4.9) allows you to time an event and measure up
to four sub-intervals, such as lap times. To use the stopwatch:
1. From the Idle screen, press [
Stopwatch.
2. Press [
] to start the stopwatch. You can measure sub-intervals by
pressing [
3. Press <Stop> to stop the count.
4. Press <Reset> to erase the recorded times.
].
] and select Media
].
] and select Media
→
→
Tools
→
→
Tools
Media
81
Advertisement
Table of Contents
