Ergonomic Recommendations; Regulatory Information - Datalogic QuickScan Lite QW2100 Quick Reference Manual

Ergonomic Recommendations

• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.

Regulatory Information

All models are designed to be compliant with rules and regula-
tions in locations they are sold and will be labeled as required.
Any changes or modifications to equipment, not expressly ap-
proved by Datalogic could void the user's authority to operate
the equipment.
Power Supply
Use only a power supply approved by Datalogic for this prod-
uct and model. Models require either a Listed class II or class
III with a Limited Power Source(LPS) which supplies power di-
rectly to the reader. For the safety certification to be valid, class
III input power sources must be IEC/EN60950-1 (EN
60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC
Max Current: 0.35 Amps
16
In order to avoid or minimize the
potential risk of ergonomic injury fol-
low the recommendations below.
Consult with your local Health &
CAUTION
Safety Manager to ensure that you
are adhering to your company's
safety programs to prevent employee
injury.
For USB Power Off Terminal appli-
cations, attach to USB 1.0, 1.1 or
2.0 host device only.
NOTE
Output: 5 VDC
Power Out: 12.5 Watts
QuickScan
TM
Lite QW2100