Disassembly; Upper Case, Front Panel Block Assembly; Boards; Board, Rear Panel - Sony SLV-M10HF Service Manual

NOTE: Follow the disassembly procedure in the numerical order given.

2-1. UPPER CASE, FRONT PANEL BLOCK ASSEMBLY

3 Flat cable
From CN162 on
MA-335 board
5 Front panel
block assembly
2-2. FR-139, DM-81, AJ-2, AN-17 BOARDS
5 Antenna (large) shield plate <Note>
3 Flat cable
From CN140 on
FR-139 board
9 AN-17 board
Front panel assembly
2-3. NL-2 BOARD, REAR PANEL
2 NL-2 board
SECTION 2

DISASSEMBLY

1 Screws (case)
3 Connector
From CN423 on
MA-335 board
4 Hooks
4 Hooks
6 Screw (B2.6 × 8)
7 JK ground plate
4 Screw (B2.6 × 8)
8 AJ-2 board
3 Frexible board
From CN441 on
DM-81 board
1 Screws
4 Hooks
2
4 Hooks
1 Screws (B2.6 × 8)
2 FR-139 board
1 Screws (B2.6 × 8)
2 DM-81 board
Note : When peeling off the antenna (large) shield plate,
be sure to apply it to the original position on the
AJ-2 board.
If not so, the resonance level of AN-17 board
becomes small.
4 Hooks
4 Hooks
3 Release cable stopper
from rear panel
2-1
SLV-M10HF
Upper case
1 Screws (case)
4 Hooks
5 Rear panel