Toshiba 47RW1 Series Owner's Manual page 53

/Folder/select Folder or File
Back xxxxxxxxx.jpg
xxxxxxxxx.jpg xxxxxxxxx.jpg
xxxxxxxxx.jpg xxxxxxxxx.jpg
The initial highlighted position will be on the top
left thumbnail in the Multi View.
1
Press , ,  or  to move the highlight in
one window. If all of the photos will not fi t in
one screen, when pressing  at the top left
thumbnail, the screen will move to the previous
page. Conversely, when pressing  at the
bottom right thumbnail, the screen will move to
the next page.
PU (or / )/ Pu (or
to page up/down the Multi View when there
are more photos than will fi t onto one screen.
When the PU (or
are pressed, the highlight shall be on the photo
at the top left of Previous/Next Multi View.
Note:
The page down function on the last page and
page up function on the fi rst page are not
available.
2
When you select a folder, press OK to move to
the next layer. Press BACK to move back to the
previous layer.
3
Press OK to view the selected photo in Single
View mode.
Single View
In this mode, only fi les located in the selected
directory will be displayed. This view allows you
to change the photo content manually. When
moving from Multi View to Single View, the currently
selected photo will be displayed.
1
Press  to view the next photo. Press  to view
the previous photo.
2
Press  to rotate the image 90° clockwise. Press
 to rotate the image 90° counterclockwise.
Note:
The information may not be correctly displayed
depending on the contents or DMS.
5/20
xxxxxxxxx.jpg xxxxxxxxx.jpg
xxxxxxxxx.jpg xxxxxxxxx.jpg
xxxxxxxxx.jpg xxxxxxxxx.jpg
/ ) buttons can be used
/ )/ Pu (or / ) buttons
Connecting your TV
Slide Show
This view allows you to watch a slide show of
your photos. In this mode, only fi les located in the
selected directory will be played.
1
To start slideshow, press OK in the Single View
mode.
2
Press  or  to view the previous/next photo.
3
Press
Note:
Pressing  or  while in the Slide Show mode will
stop the slideshow and rotate the photo.
To set Interval Time and Repeat settings:
1
Press QUICK to open the Quick Menu.
2
Press  or  to select Interval Time or Repeat.
3
Press  or  to adjust the setting.
To set Background Music (USB only)
1
Press QUICK to open the Quick Menu while in
the Slide Show mode.
2
Press  or  to select Background Music and
press  or  to select On.
The music fi le in the same folder as the
displayed photo will start playing.
Note:
To stop music fi le playback, select Off in Background
Music.
To zoom in/out photos
During the Single View mode or Slide Show mode,
the zoom function can be used.
RED button (Zoom in)
USB: x1 S x2 S x4 S x8 zoom
DMP: 1/8X S 1/4X S 1/2X S 1X S 2X S 4X
S 8X zoom
GREEN button (Zoom out)
USB: x8 S x4 S x2 S x1 zoom
DMP: 8X S 4X S 2X S 1X S 1/2X S 1/4X S
1/8X zoom
BACK button: Normal playback
  buttons: Vertical or Horizontal scrolling
Note:
Using the zoom function while in the Slide Show mode
will stop the slideshow and zoom in/out the photo.
To select a photo from Play List
While in the Single View mode or Slide Show mode,
you can select a diff erent photo from the Play List.
to display fi le status information.
53