Hdmi Cec Connection - Toshiba 47RW1 Series Owner's Manual

Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust Clock Phase
and display a clear picture.
1
From the PC Settings menu, press  or  to
select Clock Phase.
2
Press  or  to obtain a clear picture.
Adjusting the Sampling Clock
If the Sampling Clock does not match with the dot
clock frequency of the PC, blurred picture detail will
occur, or screen width will change, or drift patterns
in vertical lines may be apparent.
This function enables you to adjust it and optimize
the picture.
1
From the PC Settings menu, press  or  to
select Sampling Clock.
2
Press  or  to optimize the picture.
Resetting the PC Settings
The Reset function adjusts the PC Settings to the
factory settings.
1
From the PC Settings menu, press  or  to
select Reset.
2
Press OK.
Note:
When a PC is connected using HDMI none of these
function will be available.
Connecting your TV

HDMI CEC connection

You can control the basic functions of connected
audio/video devices using the TV's remote control if
you connect a HDMI CEC compatible audio receiver
or playback device. For an explanation of setup and
operations (- pages 34- 35).
Before controlling the device(s):
• After completing the below connections, set the
HDMI CEC Setup menu as you desire (- page
35).
• The connected devices must also be set. For
details, see the owner's manual for each device.
Connection example
Note:
• If several devices are connected, CEC feature may not
operate properly.
• For proper operation, it is recommended that you
use HDMI cables with the HDMI Logo (
• This function is limited to models incorporating CEC
function. Refer to the individual owner's manuals for
compatibility information.
Playback device
TV back view
AV Amplifier
Playback device
).
43