Setting Up The Network - Toshiba 47RW1 Series Owner's Manual

• Use of the WLAN Adaptor in other USB products
may result in damage to the WLAN Adaptor and
or the equipment. Such use will void any warranty
that may otherwise apply, and TOSHIBA will have
no liability for any damage that may result from
such use.
CAUTION:
• Bluetooth™ and Wireless LAN devices operate within
the same radio frequency range and may interfere
with one another. If you use Bluetooth™ and Wireless
LAN devices simultaneously, you may occasionally
experience a less than optimal network performance
or even lose your network connection.
• If you should experience any such problem,
immediately turn off either your Bluetooth™ or
Wireless LAN device.
• Actual performance can vary, including lower
wireless network capacity, data throughput rate,
range and coverage.
• Performance depends on many factors, conditions
and variables, including distance from the access
point, volume of network traffi c, building materials
and construction, operating system used, mix of
wireless products used, interference and other
adverse conditions.
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit
radio frequency electromagnetic energy. The level
of energy emitted by Wireless LAN devices, however,
is far less than the electromagnetic energy emitted
by wireless devices such as mobile phones.
Because Wireless LAN products operate within the
guidelines found in radio frequency safety standards
and recommendations, TOSHIBA believes Wireless
LAN is safe for use by consumers. These standards
and recommendations refl ect the consensus of the
scientifi c community and result from deliberations
of panels and committees of scientists who
continually review and interpret the extensive
research literature.
In some situations or environments, the use of
Wireless LAN may be restricted by the proprietor
of the building or responsible representatives of
the organization. Such restrictions may apply in
environments where the risk of interference to
other devices or services is perceived or identifi ed
as harmful.
If you are uncertain of the policy that applies to the
use of wireless devices in a specifi c organization
or environment, you are encouraged to ask for
authorization to use the Wireless LAN device prior to
turning on the equipment.
Connecting your TV
How to use this Dual Band Wireless LAN Adaptor
• If this device is going to be operated in the
frequency range of 5.15 GHz to 5.35 GHz, it is
restricted to indoor use.

Setting up the Network

To select the Network Type
(except for RW1 EE/E5/V5 models)
1
From the PREFERENCES menu, press  or  to
select Network Setup and press OK.
2
Press  or  to select Network Type, and then
press  or to select Wired or Wireless.
Network Setup
N e w t o k r
Wireless Setup
Advanced Network Setup
Network Connection Test
Network PIN Setup
Network Lock
Note:
If the Dual Band WLAN Adaptor is not connected,
Wireless cannot be selected.
3
If you selected Wired, see "Advanced Network
Setup" (- page 48).
Wireless Setup
(except for RW1 EE/E5/V5 models)
Note:
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to
Wired.
• When you insert or remove the wireless LAN adaptor,
you must turn off your TV and unplug the power
cord, and then plug and turn on again.
• Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected
while watching TV.
• Do not remove the Dual Band WLAN Adaptor
when Network Type is set to Wireless or wireless
communication is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make
connection of wireless LAN equipment and
security setup easy. WPS will automatically
confi gure all wireless settings.
T y p e W i e r d
Off
45