Labeling Video Input Sources; Channel List; Using Hdmi Cec Fuction - Toshiba 47RW1 Series Owner's Manual

Labeling video input sources

These input labels are shown in the input selector.
You can label video inputs according to the devices
you have connected to the TV.
1
From the PREFERENCES menu, press  or 
to select AV Connection and press OK.
2
Press  or  to select Input Labeling and
press OK.
Input Labeling
Input
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
3
Press  or  to select the item you want to
label and press  or  to select --, Amplifi er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
4
Repeat step 3 for other video inputs.

Channel List

1
Press LIST. The Channel List will appear.
1
2
3
4
5
6
7
8
2
Press  or  to select a channel, and then
press OK.
34
Label
--
--
--
--
--
--
--
Channel List
Using the TV's features

Using HDMI CEC Fuction

This feature uses CEC (Consumer Electronics
Controls) technology and allows the control of HDMI
CEC compatible devices from the TV remote control
via HDMI connection (- page 43).
Note:
This feature may not work properly depending on the
connected HDMI CEC compatible device.
HDMI CEC one touch play
When a connected device is turn on CEC will
automatically detect the TV through the input
selection. If the TV is in standby it will be turn on
automatically. This feature is selected in the HDMI
CEC Setup menu.
Note:
Even if the device is showing a menu the TV may
automatically show the video input source on-screen
display.
HDMI CEC system standby
This feature automatically turns the connected
device into standby when the TV goes into standby
and conversely for the TV to switch into standby
when connected device goes into standby.
HDMI CEC system audio control
Using the Speaker Preference feature allows the TV
remote control to adjust the volume or mute the
sound of the speakers connected to the TV via an AV
amplifi er.
Ensure that the connected AV amplifi er and HDMI
CEC compatible device are selected in the input
source selection and that the Speaker Preference is
set to Amplifi er in the HDMI CEC Setup menu or in
the Quick Menu (Speakers).
Note:
• When you turn on the AV amplifi er, change its input
source, or adjust the sound volume, the sound will
be output from the AV amplifi er's speakers even if
TV Speakers has been selected. Turn the TV fi rst to
standby and on again to output the sound from the
TV's speaker.
• The proper function may not work by operating AV
amplifi er.
• The above functions are dependent on the
connected device and TV setting.