Unpack The Box; Connect Expansion Module - InFocus IN1 Quick Start And Reference Manual

Please read the safety instructions booklet before setting up
the projector.

Unpack the box

1
Here's what's included:
Projector

Connect expansion module

2
(if purchased with projector)
Make sure the projector is turned off and the power cord is unplugged
i i
before connecting or disconnecting a module.
Outline
Power Cord
1
Completely retract the projector's
elevator foot (if needed)
The foot is under the front of the projector.
2
Remove the rubber connector cover
from the bottom of the projector
Save it in case you disconnect the module later.
3
Look at the outline on top of the
module to correctly position the
projector
4
Snap the projector down onto the
module
Press down until you hear a 'click'.
Audio/video cables are not
i i
included. You can buy them at
www.infocus.com/store or from
your local electronics retailer.