Spectrum DX4R Pro Instruction Manual page 13

2. Adjust the Brake Mix Value to establish the brake bias
between the front and rear brakes. Switch: You may assign
the the Brake Mix to a switch. Assigning the Brake Mix to a
switch enables you to adjust the brake bias from any screen.
Spektrum DX4r prO • tranSmitter inStructiOn manual
Brake Mix
Use the Brake Mix on large scale
vehicles that require separate front
and rear brake servos. The mix value
creates brake bias between the front
and rear brakes. Assigning the Brake
Mix to a switch enables you to adjust
the mix value from any screen.
1. Select Aux1 or Aux2 as the
Slavechannel. If Aux1 or Aux2
is assigned to another mix,
it will not be available as
a Slave channel option.
PROGRAMMABlE MIx
The Programmable mixes enable you
to assign any channel as a Master
or Slave, which is particularly helpful
when you need to assign an Aux
channel as a Master.
1. Scroll to Inh. Press the rolling
selector once and select a
Master channel.
2. Select a Slave channel.
3. Adjust the A Value percentage.
You can assign custom names to the Programmable mixes, mak-
ing it easier to remember what each mix does. Assign the names
the same way you would for the Username or Model Name.
Mix Options
Trim: Inh or Act. When Trim is Active, trim adjustments
to the Master channel also apply to the Slave channel.
Switch: You may assign the mix to a switch, enabling
a B Value in the mix.
To adjust the B Value:
1. Assign a switch to the mix.
2. Press the switch forward or back. The A Value changes
to B Value on the screen.
3. Select the B Value and move the scroll wheel to adjust
the value.
4. Press the Rolling Selector to save the selection.
NOTICE: A negative value results in the secondary
channel moving in a direction opposite the direction
of the primary channel.
EN
13