System - Spectrum DX4R Pro Instruction Manual

SySTEM

The System function lets you adjust transmitter functions.
SWITCh
Switch A, B, C, D, E
Inhibit Ax2 Exp+
Idle Up Ax2 Exp-
Ax1 Lin Brake +
Ax1 2P Brake –
AX1 3P Thr Trm +
Ax1 MT Thr Trm –
Ax1 Trm+ Thr Exp +
Ax1 Trm- Thr Exp –
Ax1 Exp+ S/R Ovrd
Ax1 Exp- Str Trm +
Ax2 Lin Str Trm –
Ax2 2P Str S/R +
Ax2 3P Str S/R –
Ax2 MT Str Exp +
Ax2 Trm+ Str Exp –
Ax2 Trm- ROSS Bnd
Switch F
Inhibit S/R Ovrd
Ax1 2P ROSS Ax1
Ax2 2P ROSS Ax2
USERNAME
Spektrum DX4r prO • tranSmitter inStructiOn manual
The Switch menu enables you to as-
sign any of the seven switches to one
of the following functions. Switches
that have a +/- next to the name can
be assigned to different directions.
For example, ST trim+ causes right
steering trim to trim the steering
to the right. ST trim- causes right
steering trim to trim steering to the
left. Aux1 and Aux2 can only be as-
signed to one function at a time. For
example, if Aux1 is assigned to 4WS
Mix, then it it will not be available as
an option on the switch screen.
ROSS Ax1
ROSS Ax2
4WS Mix
Brake Mix
MOA Mix
TH BIAS
Mix A
Mix B
Mix C
Mix D
Mix A Rate
Mix B Rate
Mix C Rate
Mix D Rate
Timer
ROSS Bnd
Timer
You can program a user name
with up to 10 characters. This name
is displayed on the Main Screen. In
the System screen, highlight the User
Name and press the roller to access
the function. Use the roller to select
the position, then press the roller
to access a character. Username
affects all models.
DISPlAy
Contrast
The contrast function provides
adjustment to the brightness ratio
of the lightest to the darkest part of
the screen. You can set the contrast
to a value from 0 to 30 (0 is lightest
and 30 is darkest).
light
You can set the backlight to one
of three modes:Timer, On or Off.
Timer: The backlight will turn off
after a preset delay.
On: The backlight never turns off when the transmitter is on.
Off: The backlight is always off.
1. Use the Rolling Selector to access Light.
2. Press the roller and the surrounding box will flash.
3. Rotate the roller to the desired backlight mode and press
the roller to select it.
Timeout
You can adjust the amount of time the backlight is on.
The timeout only applies when Light is set to Timer.
Trims
Changing the Trim values will change the bars shown at the
bottom of the Main screen. For example, if you select ST Trim
for Pos. 1, the Steering Trim will appear in the first bar on
the Main screen.
lang (language)
The DX4R PRO can display the screen text in one of four
languages: English (default), German, French and Italian.
Use the roller and select the Language function.
EN
17