Operation; Preliminary Steps; Operation Quick Start - Vertex Standard VX-920E Series Operating Manual

Preliminary Steps

r Install a charged battery
pack onto the transceiver, as
described previously.
r Screw the supplied antenna
onto the Antenna jack.
Never attempt to operate
this transceiver without an
antenna connected.
r If you have a Speaker/Mi-
crophone, we recommend
that it not be connected until you are familiar with
the basic operation of the VX-920E.
12
o
pEration

Operation Quick Start

r Tu r n t h e t o p p a n e l 's
VOL/PWR knob clock-
wise to turn the radio on.
r Turn the top panel's CH
selector knob to choose
the desired operating
channel. On the 16-key
and 4-key versions, a
channel name will appear
on the LCD.
r If you want to select the operating channel from a
different Memory Channel Group, press the Pro-
grammable key (assigned to the Memory Group
Up or Down function) to select the Memory
Channel Group you want before selecting the op-
erating channel. A Group name will appear on the
LCD whenever the Programmable key is pressed.
Note: Some models are programmed so that the
operating channels are selected by the Program-
mable key and the memory channel group is
selected by the CH selector knob. For further de-
tails, contact your Vertex Standard dealer.
VX-920E S O M
EriES pErating anual