Advertisement
www.mayones.com
Battery replacement
If a guitar is equipped with active electronics, a preamp, a piezo
system, or LED fret markers, they are usually powered by one or
two 9V batteries. The battery compartment (or compartments)
are located on the back of the instrument´s body (fig. 23).
Opening them does not require tools, however caution is
advised in order not to break the delicate lid. The
compartment´s construction prevents putting the battery in the
wrong way. The compartment is locked by gently pushing the lid back,
which produces a distinct click.
Cleaning
In order to preserve the aesthetic look and good technical shape,
the instrument should be regularly cleaned and maintained. An
instrument should be thoroughly cleaned after each playing session
- especially the neck, strings and body. Attention should be given
to wiping all sweat residue, which is the main cause of string and
metal parts' corrosion. It also decreases the gloss of the finish.
The best tool for wiping the sweat residue is a soft, dry cloth. As an
option, some types of specifically formulated polish can be used,
respectably for finished, not finished and metal parts. These
products should be handled with caution and their usefulness
should be first checked on a small, less visible piece of surface.
Products based on acids, alkalis, benzene, gasoline, alcohols,
solvents and strong detergents, should not be used. We advise
thorough cleaning and maintenance during each string change.
Natural (wax and oil) finishes require different kinds of attention. Delicate cloths can be
used for cleaning, but maintaining the the finish is achieved by using a specifically formulated
polish based on natural oils. When using them, be sure to act according to the instructions
on their containers.
Rosewood, ebony and other types of exotic wood occasionally require impregnating.
The need for such an operation may be indicated by the wood looking more pale and mat.
In order to facilitate impregnating, it is recommended to remove the strings and to wipe the
fretboard with a soft brush. Next, after soaking a cloth with Lemon Oil (Fretboard Conditioner)
rub it in the fretboard. This procedure should be repeated a few times with hour-long intervals.
In the end, wipe the residue off with a dry cloth.
Other options
Due to the restricted volume of this User's Manual, an array of other options and technical
solutions was not mentioned here. Among these are: Hipshot D-tuners, different bridge
constructions, LED fret markers, or sophisticated electronics packages. If you encounter
problems with your instrument, visit our technical support page at www.mayones.com ,
or contact us via email.
Electric Guitar User's Manual
EN
fig. 23
- 11 -
Advertisement
