Tx Test - LG KP500 Service Manual

11. Stand-alone Test

11.2 Tx Test

1 Click "Non signaling mode" bar and then confirm "OK" text in the command line.
2 Put the number of TX Channel in the ARFCN.
3 Select "Tx" in the RF mode menu and "PCL" in the PA Level menu.
4 Finally, Click "Write All" bar and try the efficiency test of Phone.
LGE Internal Use Only
Change ptest mood
Copyright © 2008 LG Electronics. Inc. All right reserved.
- 146 -
Only for training and service purposes