Options While On Calls; Volume Control; Call Waiting; Mute - AT&T CRL81212 Abridged User Manual

Telephone operation

Options while on calls

Volume control

While on a call, press
increase the listening volume. You
six levels.

Call waiting

If you subscribe to call waiting service from your telephone service provider,
and someone calls while you are already on a call, you hear two beeps. Press
FLASH to put your current call on hold and take the new call.
PHONE/
FLASH at any time to switch back and forth between calls.
Press
PHONE/

Mute

Use the mute function to turn off the microphone. You can hear the caller, but
the caller cannot hear you.
Press MUTE/
DELETE

Chain dialing

Use this feature to initiate a dialing sequence from the numbers in the directory,
caller ID history or redial memory while you are on a call.
To access the directory or caller ID log while on a call:
1. Press MENU/
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
/SELECT to dial the number shown.
4. Press
MENU
To access the redial list while on a call:
1. Press REDIAL/
2. Press q or p
CID
repeatedly to show the last 10 recently dialed numbers. Then, press
/SELECT to dial the number shown.
MENU
/VOLUME to decrease or press
qCID
during a call to enable or disable the mute feature.
.
SELECT
to scroll to >Directory or >Caller ID log, then press
DIR
to scroll to the desired number.
DIR
to show the most recently dialed number.
PAUSE
to scroll to the desired number, or press REDIAL/
DIR
can set the listening volume to one of
13
/VOLUME to
pDIR
PAUSE