Table of Contents
Advertisement
⁄1
Attach the controller.
There are two controller mounting pins on the high sound side of rail (1). Align the two holes in the
controller mounts with these pins and hook the controller onto the pins one side at a time.
Controller mounting pins
Rail (1)
⁄2
Connect the driver with the controller.
Connect the MOTOR IN terminal of the driver with the MOTOR OUT terminal of the controller using
the supplied 8P DIN cable*.
To connect align the arrow mark ( ) on the plug with the screw next to the jack.
Controller
Screw
Arrow Mark
8P DIN Cable
* In case the 8P DIN cable is misplaced, the following spare part may be ordered:
Part No.
W5 128092
High Sound Side
Controller
Driver
Part Name
Specification
8P DIN Cable
L=220
Assembly
Screw
Arrow Mark
27
Advertisement
Table of Contents
