Asus VivoPC Barebone User Manual page 23

5. Slide the top cover towards the rear of VivoPC until it is
detached from the chassis.
6. Remove the cover and set aside.
7. Carefully slide the DualBay adapter from the SATA connector
then remove it from the drive bay.
NOTE: The VivoPC barebone is shipped with an empty DualBay
adapter by default. If you wish to replace the DualBay adapter with a
3.5-inch HDD, refer to the section Installing a 3.5-inch HDD for more
information.
VivoPC Barebone
23