Table of Contents
Advertisement
Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port
Light Blue
(Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
For an 8-channel speaker setup, refer to the 7.1-channel configuration in the table.
7.
USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
8.
DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
output RGB Signal to CRT and isn't compatible with DVI-I.
9.
USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
10.
USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports connect to
USB 3.0/2.0 devices.
•
•
•
•
11.
PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1-12
Headset
2.1-channel
Line In
Line Out
Mic In
—
Due to USB 3.0 controller limitations, USB 3.0 devices can only be used under a
Windows
OS environment and after USB 3.0 driver installation.
®
The plugged USB 3.0 device may run on xHCI or EHCI mode, depending on the
operating system's setting.
USB 3.0 devices can only be used for data storage.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
4.1-channel
5.1-channel
Rear Speaker Out Rear Speaker Out Rear Speaker Out
Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
Bass/Center
—
7.1-channel
Bass/Center
—
Side Speaker Out
Chapter 1: Product introduction
Advertisement
Table of Contents
