Host Name - ZyXEL Communications ZyWall USG 300 User Manual

Chapter 50 System
• Connect an external serial modem to the AUX port to provide a management
connection in case the ZyWALL's other WAN connections are down. Use the
System > Dial-in Mgmt. screen (see
the external serial modem.
• Vantage CNM (Centralized Network Management) is a browser-based global
management tool that allows an administrator to manage ZyXEL devices. Use
the System > Vantage CNM screen (see
your ZyWALL to be managed by the Vantage CNM server.
• Use the System > Language screen (see
language for the ZyWALL's Web Configurator screens.
Note: See each section for related background information and term definitions.

50.2 Host Name

A host name is the unique name by which a device is known on a network. Click
Configuration > System > Host Name to open the Host Name screen.
Figure 533 Configuration > System > Host Name
The following table describes the labels in this screen.
Table 231 Configuration > System > Host Name
LABEL
System Name
Domain Name
Apply
Reset
810
DESCRIPTION
Choose a descriptive name to identify your ZyWALL device. This name
can be up to 64 alphanumeric characters long. Spaces are not allowed,
but dashes (-) underscores (_) and periods (.) are accepted.
Enter the domain name (if you know it) here. This name is propagated to
DHCP clients connected to interfaces with the DHCP server enabled. This
name can be up to 254 alphanumeric characters long. Spaces are not
allowed, but dashes "-" are accepted.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Section 50.11 on page
Section 50.12 on page
Section 50.13 on page
ZyWALL USG 300 User's Guide
853) to configure
855) to allow
858) to set a