The Trunk Summary Screen - ZyXEL Communications ZyWall USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 300:

Table of Contents

Chapter 14 Trunks

14.2 The Trunk Summary Screen

Click Configuration > Network > Interface > Trunk to open the Trunk

screen. This screen lists the configured trunks and the load balancing algorithm

that each is configured to use.

Figure 294 Configuration > Network > Interface > Trunk

The following table describes the items in this screen.

Table 87 Configuration > Network > Interface > Trunk

Show Advance

Settings / Hide

Advance Settings

Click this button to display a greater or lesser number of configuration

Enable link sticking to have the ZyWALL route sessions from one

source to the same destination through the same link for a period of

time. This is useful for accessing servers that are incompatible with a

user's sessions coming from different links.

For example, this is useful when a server requires authentication. See

Link Sticking on page 364

This setting applies when you use load balancing and have multiple

WAN interfaces set to active mode.

Specify the time period during which sessions from one source to the

same destination are to use the same link.

for an example.

ZyWALL USG 300 User's Guide