Keys Fitness Recumbent CM580R Owner's Manual page 5

Assembly of CardioMax Exercise Bike
1. Attach front and rear stabilizer (2, 7) to the main frame (1)
with the carriage bolts, arc washers and nuts.
2. Tighten the pedals (46, 48) into the crank (43). Axles of ped-
als are branded "L" and "R." The pedal marked "R" goes on
the right hand side of the bike and the one marked "L" on the
left hand side. Tighten the left pedal by turning counter clock-
wise and the right pedal by turning clockwise.
6
3. Slide the seat carriage (60) onto the frame, making sure not to
pinch any of the wires. Connect heart rate wires from the seat
carriage to those in the main frame then slide excess wiring up
into frame. Cover opening with iron plate (21) and screws
(19). Screw the adjustment knob (49) into the side of the car-
riage. Attach the slide stop (screw 28, nut 45) into the end of
frame post.
4. Attach seat and seat back onto seat carriage with screws (66
and washers (64).
7