Note: Before beginning the seat installation, set the
parking brake, place the vehicle in gear or park and
chock the wheels to reduce the risk of the vehicle
unexpectedly moving, which could result in seri-
ous injury.
WARNING
If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. If the Floor Mounting
Brackets are not flush mounted, the seatback may not lock in place, which could result in serious injury to you and others.
1986 and Newer Vehicles
Step One
Floor Mounting Bracket Installation
Locate the Floor Mounting Bracket mounting holes on the floor of
the vehicle behind the front seat risers. Align the Floor Mounting
Brackets over the mounting holes with the loop on the bracket
positioned towards the front of the vehicle. Insert two (2) 3/8-16 x
1 1/4" Bolts in each bracket. Loosely tighten the bolts using an