Advertisement
Seat, Qty - 1
Lock Down
Bracket, Lt,
Qty - 1
Note: Use only the Bestop hardware
provided in the kit.
39333/39343 pg 2
Parts List and Hardware Identification
Floor Mounting
Brackets, Qty - 2
Lock Down
Bracket, Rt,
Qty - 1
Tapping Plate, Qty - 4
Tools Needed
Adjustable Wrench or
9/16" Wrench
7/16" Wrench
1/2" Wrench (older models)
10mm Wrench (older models)
Safety Glasses
1985 or Earlier Vehicles
25/64" Drill Bit
7/16" Drill Bit (older models)
Cotter Pin, Qty - 2
TrailMax™ Fold and Tumble
Rear Seat
Installation Instructions
For: All Jeep
®
CJ5s, CJ7s and Wranglers 1955-1995
Part Number: 39333 Vinyl
39343 Cloth
Jeep
®
is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
WARNING
Before you begin installing this seat, please read all installa-
tion instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing top. Failure to do so may result in a poor
NOTE: In 1985 and older vehicles, the seat
fitting top and could place occupants of the vehicle in a
installation will be easier with two people.
potentially dangerous situation.
39333/39343 pg 1
Installation Instruction
Manual, Qty - 1
Flat Washer, Qty - 2
M8-1.25 x 35mm Bolt, Qty - 8
5/16-18 x 1 1/4" Bolt, Qty - 4
3/8-16 x 1 1/4" Bolt, Qty - 4
1/4-20 x 1 1/4" Bolt, Qty - 4
1298 Rev. 1
Plastic Flat Washer,
Qty - 2
M8-1.25 Hex
Nut Qty - 8
1201 Rev. B
Advertisement
