Advertisement
Quick Links
®
For: All Jeep
CJ5s, CJ7s and Wranglers 1955-1995
Jeep
®
is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
WARNING
Before you begin installing this seat, please read all installa-
tion instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
39333/39343 pg 1
TrailMax™ Fold and Tumble
Rear Seat
Installation Instructions
NOTE: In 1985 and older vehicles, the seat
installation will be easier with two people.
Part Number: 39333 Vinyl
39343 Cloth
1201 Rev. B
Advertisement
Summary of Contents for Bestop TrailMax 9333 Vinyl
-
Page 1: Installation Instructions
39343 Cloth Jeep ® is a registered trademark of Chrysler and Bestop is not affiliated with Chrysler Corporation. WARNING Before you begin installing this seat, please read all installa- tion instructions and warnings thoroughly. This seat is designed to be used on the model vehicles described above. -
Page 2: Tools Needed
39343 Cloth Jeep ® is a registered trademark of Chrysler and Bestop is not affiliated with Chrysler Corporation. WARNING Before you begin installing this seat, please read all installa- tion instructions and warnings thoroughly. This seat is designed to be used on the model vehicles described above. -
Page 3: Seat Installation
Seat Installation Caution Note: Before beginning the seat installation, set the parking brake, place the vehicle in gear or park and chock the wheels to reduce the risk of the vehicle unexpectedly moving, which could result in seri- ous injury. WARNING If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. - Page 4 If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. If the Floor Mounting WARNING Brackets are not flush mounted, the seatback may not lock in place, which could result in serious injury to you and others. 1985 and Older Vehicles Step One Seat...
- Page 5 1/2" wrench for 1986 - 1991 vehicles, or a 7/16" wrench for 1992 - 1995 vehicles. securely into Lock Down Bracket Note: If replacing a factory seat, please remove all factory hardware and replace with Bestop hardware from the enclosed kit. 1201 Rev. B 39333/39343 pg 5...
- Page 6 Lock (bottom hole Down Bracket rearward of top hole) Tapping Plate Lock Down Bracket Note: If replacing a factory seat, please remove all factory hardware and replace with Bestop hardware from the enclosed kit. 1201 Rev. B 39333/39343 pg 6...
- Page 7 Care of your Bestop Seat Your seat is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning. Washing: The seat fabric should be washed often using a mild detergent, warm water and a soft bristle brush.