Hitachi DH 40MRY Technical Data And Service Manual page 10

6. Demolition work (Hammering)
7. Grooving and edging (Hammering)
8. Cutting and stripping (Asphalt cutting etc.) (Hammering)
(1) Cutter (SDS-max shank)
Overall length
400 mm (15-3/4")
9. Digging (Substitute pick-ax) (Hammering)
(1) Scoop (SDS-max shank)
(1) Bull point (SDS-max shank)
Overall length
280 mm (11")
400 mm (15-3/4")
(1) Cold chisel (SDS-max shank)
Overall length
280 mm (11")
400 mm (15-3/4")
Overall length
400 mm (15-3/4")
Code No.
313471
313472
Code No.
313473
313474
Width
50 mm (2")
Code No.
313476
--- 7 ---
Code No.
313475