CrimeStopper SecurView OEM-6218 Installation Instructions

Wide-angle oem camera

The OEM-6218 is a special designed OEM camera with a custom mounting bracket that allows

it to be mounted easily to the vehicle. It is designed to take the place of the license plate

illumination lamps on the Honda Odyssey 2009-2011 vehicles with minimal installation time

and with no special tools required for the job. Once installed, the camera looks completely

factory and is easy to keep out of sight.

• Replaces the license plate illumination lamp when mounted

• The 170° ultra wide-angle

• Easily mounts to vehicle with minimal installation time

• Parking assist lines to help the driver accurately judge distance behind the vehicle

• Constructed of high-grade plastic

• Reverse image

• The OEM cam easily connects with other SecurView products such as any of the LCD

monitors. It can also be integrated with your existing OEM or aftermarket LCD/TFT

displays.

• The Securview™ OEM-6218 is designed specifically for the Honda Odyssey vehicle and

may not work well on other vehicles. Please check the vehicle before installing to make

sure the camera can be properly placed

INSTALLATION INSTRUCTIONS:

OEM-6218

Wide-Angle OEM

Camera

Table of Contents

Do you have a question about the SecurView OEM-6218 and is the answer not in the manual?

Page 1: Installation Instructions
OEM-6218 Wide-Angle OEM Camera INSTALLATION INSTRUCTIONS: The OEM-6218 is a special designed OEM camera with a custom mounting bracket that allows it to be mounted easily to the vehicle. It is designed to take the place of the license plate illumination lamps on the Honda Odyssey 2009-2011 vehicles with minimal installation time and with no special tools required for the job.
Page 2 INSTALLATION MOUNTING: 1. The OEM-6218 is design to be mounted on the License Plate bezel of a Honda Odyssey vehicle. If you wish to mount this camera on any other vehicle, double check the mounting location to see if the camera will fit on your vehicle in your location of choice. 2.
Page 3 WIRING: 1. Carefully choose a hidden out-of-sight location for drilling the cable hole. Some vehicles may have an existing hidden rubber grommet or plug available to avoid having to drill into the body. Be sure to double-check for any wiring or obstructions behind the surface where you are going to drill the cable hole.
Page 4 Federal Motor vehicle codes with regards to modifications of vehicle license plates. The manufacturer of the Securview™ assumes no liability or responsibility whatsoever with regards modifications of the license plate. www.crimestopper.com email@crimestopper.com Phone (800) 998-6880 FAX (805) 581-9500 © 2011 Crimestopper Security Products 5-17-2011...