Axis Poe Midspan 1-Port - Axis PoE Midspan 1-Port Installation Manual

AXIS PoE Midspan 1-Port

Functions and Features
The Power over Ethernet (PoE) Midspan adds 48V DC to unused (non-data)
wires (Mode B) in a standard Category 5 Ethernet cable. As a result, the PoE
Midspan delivers both data and power to the terminal. The device is
designed to meet the IEEE802.3af standard.
Preliminary Steps
• Ensure AC power is applied to the PoE Midspan using an operational
AC cable with an appropriate ground connection.
• Ensure that output Ethernet cable is connected to the Data & Power
Out port.
• Verify that a power ready Ethernet compatible device is connected.
Note:
Do not use a cross over cable between the PoE Midspan output port
and the load device
Installation
The PoE Midspan may be wall or bench mounted using the rear side holes.
Note the following before mounting the PoE Midspan to a fixed location:
• Do not to cover the PoE Midspan or block the airflow to the PoE with
any foreign objects. Keep the PoE Midspan away from excessive heat
and humidity, and keep it free from vibration and dust
• Ensure that the cable length from the Ethernet network source to the
terminal does not exceed 100 meters (333 Feet). The PoE is not a
repeater and does not amplify the Ethernet data signal
• Use a splitter if desired; ensure that the splitter is connected close to
the terminal and not on the Midspan
• There is no "on-off" switch, simply plug the PoE Midspan into an AC
power source
AXIS PoE Midspan 1-Port
3