Table of Contents
Advertisement
2.3 Earth-Grounded Socket Outlets
Connect only to properly earthed socket outlet.
2.4 Before Removing the Access Covers
Turn off all peripheral devices connected to this product.
Turn off the system by pressing the power button on the front of the product.
Disconnect the AC power by unplugging all AC power cords from the system or wall outlet.
Disconnect all cables and telecommunication lines that are connected to the system.
Retain all screws or other fasteners when removing access cover(s). Upon completion of accessing
inside the product, refasten access cover with original screws or fasteners.
Do not access inside power supply. There are no serviceable parts in the power supply.
Return to manufacturer for servicing.
2.5 Fans
CAUTION
To avoid injury, do not contact moving fan blades.
2.6 Electrostatic Discharge (ESD)
CAUTION
Perform the procedures in this product guide only at an electrostatic discharge (ESD) workstation, because the
server components can be extremely sensitive to ESD. If no such station is available, you can reduce the risk
of electrostatic discharge ESD damage by doing the following.
Wear an antistatic wrist strap and attach it to a metal part of the server.
Touch the metal on the server chassis before touching the server components.
Keep part of your body in contact with the metal server chassis to dissipate the static charge while
handling the components.
CAUTION
To avoid electrical shock, the system power cord(s) must be plugged into socket-outlet(s) that is
provided with a suitable earth ground. The system will be provided with the following marking:
CAUTION
To avoid personal injury or property damage, the following safety instructions apply whenever
accessing inside the product:
12
Advertisement
Table of Contents
