Table of Contents
Advertisement
Avoid moving around unnecessarily.
Hold the server components (especially boards) only by the edges.
Place the server components on a grounded, static-free surface.
Use a conductive foam pad if available but not the component wrapper.
Do not slide the components over any surface.
2.7 Cooling and Airflow
CAUTION
For proper cooling and airflow, always install all access covers before turning on the system.
Operating the system for longer than five minutes without the covers in place can cause overheating and
damage to system components.
2.8 Battery
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
13
Advertisement
Table of Contents
