Resetting Control Panel Defaults; Solving Setup Problems - Epson M200 User Manual

Print Head Alignment
When to Uninstall Your Product Software
Related references
Where to Get Help

Resetting Control Panel Defaults

If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the
2. Press the up or down arrow buttons to select Restore Default Settings and press the OK button.
You see a screen like this (M205 screen shown):
3. Press the up or down arrow buttons to select one of these options and press the OK button.
• Reset Wi-Fi Settings (M205) or Reset Network Settings (M200): Restores all of the default
network settings.
• Reset All except Wi-Fi Settings (M205) or Reset All except Network Settings (M200):
Restores all of the default settings on the control panel, except for the network settings.
• Reset All Settings: Restores all of the default settings on the control panel.
You see a confirmation screen.
4. Select Yes to reset the selected settings. (Select No if you want to cancel the operation.)
Parent topic:

Solving Setup Problems

Check these sections if you have problems while setting up your product.
Noise After Filling the Ink
Software Installation Problems
Parent topic:
Ajustes button.
Solving Problems
Solving Problems
145