Advertisement
Step 5
1.
.
Insert the Pedal Holder (J) into the Seat Rail (M-L, M-R) by Bolt (I-1) and Flat Washers (I-2)
Please note: The 4 bolts need to be loosely assembled to the Pedal Holder, ensure that the Pedal Holder
is straight and then tighten down the bolts. If this is not assembled properly, the seat will not slide
smoothly.
?
I-1 I-2
Step 6
1. Attach the Cover (N-6) over the Rear Support by Screws (I-4).
?
I-4
N-6
Advertisement
