Home - Aztech HL129EP User Manual

User Manual

Home

The Home menu provides a list of all the possible tasks you can perform in the
HomePlug AV Utility.
To start a task:
1. Select the network card connected to your HomePlug AV/AV2 device. This is
most helpful when you have more than one network card in your computer.
When you select a network card, the MAC Address of the HomePlug AV/AV2
connected to your computer appears. If there is no HomePlug AV/AV2
connected to your computer, no MAC address will appear.
2. Select a task. there are four possible tasks you can perform as seen below:
 Change the Private Network Name
 Change the QoS settings
 View devices in the network
 Upgrade the firmware
When you select any of the tasks available, you will be forwarded to the
respective tab of the selected task you have chosen.
Page 28 of 40