Advertisement
Manual Time Adjustment 1
If you lose your way during manual time adjustment
If you become confused and lose your way during the following
procedures, simply put the watch down and do not perform any button
operation for two or three minutes. This will cause the watch to enter
the Timekeeping Mode (indicated by normal one-second movement of
the second hand) automatically. After that, you can try performing the
manual setting procedure again from the beginning.
❚ To reset the second hand manually
1.
In the Timekeeping Mode,
hold down the A
A button for
A
A
A
about five seconds until the
second hand stops at AM or
PM.
• This is the manual setting mode.
• Note that the hands of the watch
do not move in the manual
setting mode.
• If you do not perform any button
operation for about two or three
minutes, the watch will exit the
manual setting mode and normal
hand movement will resume.
2.
A
A
A button twice.
Press the A
A
• This will cause the second hand
to move to SEC.
3.
In accordance with a time
signal on the TV or radio,
press the B
B
B
B button.
B
• This will increase the minute
setting by one and restart the
seconds count from 00.
• In Japan, you can obtain the
current time by dialing 117 on the
telephone.
Operation Guide 3707
You can perform the following procedures to adjust the time and date when
the watch is unable to receive a time calibration signal for some reason.
AM
SEC
(2 times)
❚ To set the hour and minute manually
1.
In the Timekeeping Mode,
A
A button for
A
hold down the A
A
about five seconds until the
second hand stops at AM or
PM.
• Note that the hands of the watch
do not move in the manual
setting mode.
• If you do not perform any button
operation for about two or three
minutes, the watch will exit the
manual setting mode and normal
hand movement will resume.
• Pressing the A button and the B button at the same time in the
manual setting mode will cause the hands to move to the original
(unadjusted) time setting. Then the watch will return to the
Timekeeping Mode.
2.
Use the operation described below to move the hands
clockwise.
To move the hands counterclockwise
Advance to step 3.
To move the hands clockwise
Press the B
B
B button to move
B
B
the hands clockwise by one
minute.
• Holding down the B button for
about two seconds moves the
hands clockwise at high speed.
High-speed movement of the
hands will continue until it
completes a 12-hour cycle, or
until you press any button to stop
it.
• After setting the time you want, press the A button to advance to step 4.
3.
Use the operation described below to move the hands
counterclockwise.
Press the A
A
A
A
A button.
• This will cause the minute hand to move counterclockwise about
one or two minutes, and then stop around 12 o'clock.
Press the B
B
B
B button to move
B
the hands counterclockwise
by one minute.
• Holding down the B button for
about two seconds moves the
hands counterclockwise at high
speed. High-speed movement of
the hands will continue until it
completes a 12-hour cycle, or
until you press any button to stop
it.
4.
To return to the Timekeeping Mode, press the A
times.
• This will cause the hands to move to the current time, and resume
normal movement.
AM
(Forward)
(Back)
A
A
A button six
A
4
Advertisement
