Vertical Steam Ironing - Breville 2400w Instruction Booklet

Vertical steam ironing

Never iron garments when they are being worn.
Your iron can be used for vertical steam ironing curtains, dresses on hangers etc.
1. Fill your iron with water.
2. Plug your iron into the mains supply and switch on.
3. Use the temperature select +/- buttons to select the
your iron, the more steam is generated.
4. When the
lll
and ready to use. During use, the
maintains the selected temperature.
5. Hold your iron 15cm (6 inches) from the fabric.
6. Press the shot of steam button. The steam will penetrate the fabric removing the
creases. To apply more steam press the shot of steam button again. Wait several
seconds between each press of the button.
Burst of steam
Your iron must be set to either
the steam button.
Press the shot of steam button whenever you have a stubborn crease that needs extra
steam. Steam will burst from the holes in the soleplate of your iron into the fabric.
Spraying
The spray function will only operate when there is water in the water tank.
1. The water spray can be used to help iron heavy fabrics or difficult areas (collars,
pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics
which cannot be steam ironed.
2. Simply press the button as required to produce a spray of water. If the spray is being
used for the first time, or if the iron has been standing for some time, you may need
to press the spray button a few times before it works correctly.
or MAX light stops flashing, your iron is at the correct temperature
lll
or MAX. Wait several seconds between each press of
lll
using your iron
or MAX setting. The hotter
lll
or MAX light will flash periodically as your iron
9